example part number: abac 37 w 17 35 s n product series shell style finish (table 2) shell size (table 1) insert arrangement contact type p = pin contacts s = socket contacts orientation *consult factory for custom requirements a tt group company ab connectors ltd. if not , a new drawing number must the part remains interchangeable. this drawing may only be altered if angular ` 2 ~ hole diameters ` 0.05 all decimal places ` 0.1 modifications must be carried out using cad system tolerances unless otherwise stated material: profile of a surface profile of a line parallelism cylindricity roundness flatness straightness characteristic geometric tolerance symbols a3 tolerances. notes. etc. see bs308 for explanation of dimensions. squareness symmetry concentricity position run out angularity characteristic m.m.c. sym m sym chkd date drawn be taken. worked to. not to be purposes only. for quotation drawing all dimensions are in mm description of last change c abconnectors ltd. this document and the information contained herein may not be copied, used or disclosed, in whole or in part, except with the prior written permission of ab connectors ltd., or if this document has been produced under a contract with another party as expressly authorised under that contract. it is supplied without liability for errors or omisions. issued by date product drawing number title: do not scale this drawing variations start at 001 finish code finish: varn projection issue plug with integral screen & heatshrink or overmould adaptor refer to component drawings abac.cds.0005 ag 24/02/2010 pl abac.cds.0005 ag 01/06/2010 a ? = critical characteristic ? = significant characteristic (see ab-w07-03-01 for description) b max a max ?c max table 1: connector dimensions shell size a max b max ?c max ?d max 9 18.50 47.05 21.00 12.00 11 18.50 47.05 23.70 15.05 13 18.50 47.05 29.30 18.05 15 18.50 47.05 31.30 22.05 17 18.50 47.05 35.67 25.05 19 18.50 47.05 38.40 28.05 21 18.50 47.05 41.67 31.05 23 18.50 47.05 44.90 34.05 25 18.50 47.05 47.97 37.05 table 2: finish ref finish description qb zinc cobalt black passivate w olive drab cadmium q zinc cobalt green passivate f electroless nickel issue: a by: ag rn: n/a date: 02/06/2010 ? d m a x issue: b by: ag cn: n/a date: 26/01/2011 updated table 1
|
